ZB-E系列圓體泵主要用于擠出機或中高粘度聚合物的增壓和穩定流量輸送。加熱方式主要為電加熱。適用于PS . PET . PVC . PC . PA . PMMA . HDPE .LDPE . LLDPE . PP .等工藝中。
技術參數
泵體: 高溫工具鋼，
齒輪: 高溫工具鋼，滲氮鋼
滑動軸承: 高溫工具鋼
軸封: 螺旋密封，填料密封
加熱系統 : 電加熱
規格/流量范圍: 從0.5CC - 2500CC, 0.5cm3/rev - 2500cm3/rev
操作參數
粘度: ≤40000 Pas
溫度: ≤400℃
清洗溫度: ≤450℃
進口壓力: 高可達12MPa
高壓差: 可達25MPa
ZB-E Series Circular Melt Pump
ZB-E series circular melt pump is mainly used for extruder or pressurization, stabilizing flow and transportation of medium or high viscosity polymer. This series of melt pump primarily adopts electrical heating, and applies to PS, PET, PVC, PC, PA, PMMA, HDPE, LDPE, LLDPE, PP, etc.
Technical Parameter
Material for Melt Pump Body: High Temperature Tool Steel
Material for Gear: High Temperature Tool Steel or Nitrided Steel
Material for Sliding Bearing: High Temperature Tool Steel
Shaft Sealing: Spiral Sealing or Packing Sealing
Heating System: Electrical Heating
Model/Volume Range: 0.5CC - 2500CC, 0.5cm3/rev - 2500cm3/rev
Operating Parameter
Viscosity: ≤40000 Pas
Working Temperature: ≤400℃
Cleaning Temperature: ≤450℃
Inlet Pressure: ≤12MPa
Differential Pressure:≤25MPa
